External Wall Insulation in Cambridge
Strata Insulated Renders is a Cambridge-based installer of external wall insulation (EWI) and silicone render. From our base at Knapwell, just west of the city, our teams have insulated hundreds of homes across Cambridge, from Victorian terraces and 1930s semis to council homes and large detached houses.
External wall insulation wraps the outside of your home in insulation boards, finished with a tough, weatherproof render. It’s one of the most effective ways to insulate solid walls, which have no cavity to fill and are common in Cambridge homes built before the 1920s. Because the work happens outside, you keep every inch of space indoors and can usually stay at home throughout.
We’re PAS 2030 certified and TrustMark registered, and we were named Johnstone’s EWI & Render Installer of the Year 2024. Our work for Cambridge City Council was also shortlisted as a finalist in the INCA Awards 2026.
Why Cambridge homeowners choose EWI
- Warmer rooms, lower bills – insulating the outside of solid walls cuts the heat lost through them.
- No lost space indoors – rooms stay the same size, with no replastering or moving radiators.
- A fresh new look – silicone render in a wide range of colours and finishes.
- Protection for your walls – render shields brickwork from driving rain and frost.
- A quieter home – the extra layer improves sound resistance.
- Long-term peace of mind – manufacturer guarantees of up to 25 years on the products we use.
Cambridge Homes We Insulate
Cambridge has a real mix of housing, and each type needs its own approach. Our surveyors look at how your home is built before recommending anything.
- Victorian and Edwardian terraces – usually solid brick, with bay windows, passageways and rear extensions that need careful detailing, plus a neat finish where your wall meets your neighbour’s.
- Interwar and post-war semis – some have solid walls, and some post-war homes use non-traditional construction such as concrete panels, where external insulation is often the practical option.
- Council and housing association homes – we work with landlords on funded retrofit programmes, delivered in line with PAS 2035.
- Detached and larger homes – bigger wall areas and more complex shapes, with the chance to completely transform the look of the house.
External wall insulation with a two-tone silicone render finish on a private home in Cambridge
Our Work Across Cambridge
Working with Cambridge City Council, main contractor Aran Insulation and system supplier Johnstone’s PPG, our teams have insulated more than 140 uninsulated solid brick council homes across Cambridge under Wave 2.2 of the Social Housing Decarbonisation Fund. That followed our Wave 2.1 works, which upgraded almost 100 council homes in 2024.
We installed the BBA-certified Johnstone’s Stormshield 110mm mineral wool system, finished in Stormshield Silicone Enhanced Render, improving the wall U-values from 2.49 W/m²K to 0.29 W/m²K. The Wave 2.2 project was named a finalist in the INCA Awards 2026.
Other Cambridge projects include a hostel for Cambridge City Council, where we insulated 660m² of wall and finished it in Ash Grey silicone render in under five weeks. We bring the same standards to individual homes across the city, whether it’s a single terrace or a large detached house.
Council homes in Cambridge insulated under the Social Housing Decarbonisation Fund
Planning Permission in Cambridge
Whether you need planning permission depends on where your home is and how it will look once the work is finished.
- Outside a conservation area – insulating and rendering can be permitted development, but only if the new finish looks similar to the existing walls. If it will look noticeably different, such as render over exposed brick, you’ll need to apply for planning permission.
- In a conservation area – Greater Cambridge Shared Planning says external wall insulation needs planning permission. Many of Cambridge’s older streets are in conservation areas, so it’s worth checking early.
- Listed buildings – you’ll need listed building consent, and the council’s conservation officers can give advice first.
- Building Regulations – when 25% or more of an external wall is renovated, Building Regulations normally apply and the insulation must meet current standards.
You can check what applies to your home on the Greater Cambridge Shared Planning website, and we’re happy to talk it through at your survey.
How It Works
Systems and Finishes
We install Johnstone’s Stormshield external wall insulation systems, using EPS or mineral wool insulation boards depending on your home, finished with Stormshield Silicone Enhanced Render. Silicone render is water-repellent and breathable. Find out more in our guide to what silicone render is.
There’s a wide range of colours and finishes to choose from, and you can see how your home could look with our EWI Visualiser.
Other Services in Cambridge
Alongside external wall insulation, we help Cambridge homeowners with:
- Silicone rendering – a fresh, low-maintenance finish for new and existing walls.
- Cavity wall insulation – for homes with an unfilled cavity.
- Loft insulation – often the simplest place to start.
- EWI repairs and maintenance – for existing insulated render that needs some care.
Accredited and Award-Shortlisted
We’re PAS 2030 certified, TrustMark registered (licence 2833230), a BBA Approved Installer and a member of INCA, the Insulated Render and Cladding Association. We were named Johnstone’s EWI & Render Installer of the Year 2024 and are INCA Awards 2026 finalists for our work with Cambridge City Council.
Areas We Cover Around Cambridge
We cover the whole of Cambridge, including Chesterton, Arbury, Kings Hedges, Romsey, Cherry Hinton, Trumpington, Newnham and Queen Edith’s, and surrounding villages such as Histon and Impington, Girton, Milton, Waterbeach, Cottenham, Sawston, Great Shelford, Cambourne and Comberton.
Further afield, we install external wall insulation in Peterborough, across East Anglia and in Hertfordshire, Bedfordshire and Essex.
Frequently Asked Questions
Do I need planning permission for external wall insulation in Cambridge?
It depends on your home. Outside a conservation area it can be permitted development if the finish looks similar to the existing walls, but a noticeable change, such as render over brick, needs planning permission. In a conservation area or on a listed building you’ll need permission or consent. We’ll talk it through at your survey.
How long does external wall insulation take?
A typical home takes around two weeks once work starts. Larger or more complex homes take longer, and very wet or cold weather can cause short delays, but we’ll keep you updated throughout.
How much does external wall insulation cost in Cambridge?
Every home is different. The price depends mainly on the wall area, scaffolding and access, the insulation you choose and the amount of detailing around windows, doors and roofs. Our blog on what affects the cost of external wall insulation explains it in more detail, and we provide free, no-obligation quotes.
Can you insulate a terraced house?
Yes. Terraces need careful detailing where your wall meets your neighbour’s, and scaffold access is planned in advance. We’ll explain exactly how this works for your home during the survey.
Is external wall insulation suitable for older homes?
Often, yes. Older solid-wall homes are where it can make the biggest difference. Our survey checks the condition of your walls, any existing render and signs of damp, and we’ll recommend the right system, including breathable mineral wool where it suits the building.








